Gallo Acoustics ROOMSUB Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner Gallo Acoustics ROOMSUB herunter. Gallo Acoustics ROOMSUB 16 Seiten.

MULTI-CHANNEL SET-UP

When using a multi-channel surround sound system, ﬁrst

ensure that you are familiar with your ampliﬁer's functions

to ensure that the correct mode and settings are applied.

• Identify your AV ampliﬁer's SUBWOOFER or LFE output.

Connect this to the L/LFE LINE-IN on the subwoofer

using a coaxial (RCA) cable.

Please note - You can use a Y-splitter to split the signal

into both left and right LINE-IN on the subwoofer.

Alternatively, some ampliﬁers have two LFE (SUBWOOFER)

outputs, which allows direct connection to both LINE-IN

connectors on the subwoofer via a twin coaxial (RCA) cable.

• Make adjustments on your AV ampliﬁer to ensure that

the correct frequency range is being distributed to your

speakers and subwoofer.

For Gallo Acoustics Micro and A'Diva loudspeakers, use a

small speaker setting on your ampliﬁer, to protect the

loudspeakers from the lowest frequencies.

• Turn the crossover dial to its maximum, as the AV

ampliﬁer will handle bass control and distribute the

frequencies accordingly.

• When audio is playing, adjust the LEVEL control so

the subwoofer volume matches the satellite speaker

volume.

Consult both your AV ampliﬁer and loudspeaker owner's

guides for more detailed set up instructions of these

components.

SPEAKERS

AV AMPLIFIER

ROOMSUB SUBWOOFER