Gallo Tech GTS-2 Betriebs- und Installationshandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Betriebs- und Installationshandbuch für Fernstart Gallo Tech GTS-2 herunter. Gallo Tech GTS-2 15 Seiten. Keyless rfid push button start & security system

Seite drucken

1. Key Fob & Programming Function Set up

To Start / Stop Engine.

To Start Engine: While pressing the brake/clutch peddle, Press "PUSH START STOP" button and hold

until the engine starts. IGN 1 will turn ON, the starter will engage and the engine will start. After the

engine has started, release the "PUSH START STOP" button, ACC, IGN1 and IGN2 will turn ON.

To Stop Engine: press "PUSH START STOP" button for 1.5 sec. IGN 1 and IGN 2 will turn OFF and the

engine will stop. ACC will remain ON until (a.) the "PUSH START STOP" button is pressed one time, or,

Press and hold button

While pressing foot

OFF

brake or clutch peddle

1.4 GTStarter-2 FUNCTION OPTIONS

GTStarter-2 has numerous user configurable features that can be enabled or modified according to user's

preferences. This section explains each of the user configurable functions. See Sec. 1.5 "Programming Function

Set-Up Options" for details on how to modify configurable features.

Valet Mode: In DISARM mode, Pressing valet switch for over 5 seconds will activate valet mode. Siren will chirp 2

times and the green LED will stay ON.

To deactivate valet mode (normal status), press the valet switch for over 5 seconds. The siren will chirp one time

and the green LED will flash slowly.

In Valet mode all alarm function will be disabled. The key FOB buttons can lock and unlock doors, but not the trunk.

"Push Start Stop" button functions will continue as in Normal status. If the key FOB is in range, the vehicle can be

started with the "Push Start Stop" button or the ignition key, if an ignition key switch is also used.

Transmitter (Key FOB) Code learning: The Key FOBs have been matched to the control module at the factory. If

additional key FOBs are used they must first be learned to the Control Module before they will function.

1. Automatic Door Lock / Unlock Function:

Enabled (default): When the key FOB is within range, the doors unlock automatically and the system enters Disarm

mode, the lights flash twice , siren chirps twice (by short tone) (if Silent arm/disarm function is set to OFF). The

"Push Start Stop" is activated when the door is opened, and the green LED flashes.

When the key FOB is out of range, the doors lock automatically and the system enters the Arm mode. The lamps

flash once, siren chirps once by short tone, (if Silent arm/disarm function is set to OFF). The "Push Start Stop"

button is disabled and the blue LED flashes.

(b.) the key FOB is moved out side the vehicle and is out of range.

IGN1, IGN2 will turn OFF & ACC will

Ign1 ON

Release after engine

Starter

start ING2 & ACC

Engaged

will turn ON

Press button for 1.5 Sec

No brake or clutch required

stay ON

- 6 -

Engine running

Ign1, IGN2 & ACC

Rev. V8.2- 20212