Galls Street Thunder ST240 Installations- und Betriebsanleitung - Seite 8
Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Verstärken Galls Street Thunder ST240 herunter. Galls Street Thunder ST240 12 Seiten. Siren amplifier
Seite drucken
General
This unit is designed for easy operation under the stress associated with high-speed
pursuit. Most siren functions are accessible with one simple motion without repetitive
activation of switches or automatic timed switching that can interfere with desired
operation.
Power/PA Knob
The Power/PA knob is located in the upper right hand corner of
the front face. It has two functions:
ON/OFF - This knob turns the siren on and off. While in
the OFF position none of the siren functions
will work. The position of this knob does NOT
affect the siren backlighting.
PA Volume Control - This knob also provides you the ability to adjust the public
address volume. It should be set when the vehicle is parked.
Typically you should set the PA volume to the maximum
possible level with no feedback (squeal).
Selector Switch
The rotary selector switch controls the primary operating function of the siren.
THUNDER - Ultra-fast changing tone used for maximum attention.
YELP - A rapidly changing tone used in congested areas.
WAIL - A slower changing tone used on highways.
HF - Hands Free - A silent standby mode also known as Horn Ring Cycler.
Allows the user to cycle through the tones programmed for the WAIL,
YELP, THUNDER, and OFF by repeatedly pressing the horn or other switch
connected to the AUX input. Changing the rotary knob to any other
mode will resume normal siren operation.
MANUAL - A silent standby mode that allows push-button Manual, push-button Horn,
and Public Address operation. The siren output winds down when the
MANUAL button is released.
PA - A silent standby mode that allows push-button Manual, push-button Horn
and Public Address operation. The siren output terminates immediately
when the MANUAL button is released.
RADIO - Also known as Radio Repeat, this function amplifies a radio speaker input
for re-broadcast outside the vehicle. The PA remains functional, but no
siren tones are available in this position.
Operation
-6-