Galls Street Thunder ST280 Installations- und Betriebsanleitung - Seite 3
Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Verstärken Galls Street Thunder ST280 herunter. Galls Street Thunder ST280 18 Seiten. Siren amplifier & light controller
Auch für Galls Street Thunder ST280: Installations- und Betriebsanleitung (20 seiten)
Seite drucken
GENERAL DESCRIPTION
The ST280 Siren Amplifier is a premium 200W unit designed for single or dual
100W speaker use and full lighting control.
The primary operating modes are Thunder, Yelp, Wail, Hands Free, Manual, PA,
and Radio. A Noise Canceling PA Override and push-button Horn Override are
available in all modes. A rocker switch is provided for momentary tone toggle
operation in the Thunder, Yelp, and Wail modes. It also allows manual siren
control in the Manual or PA modes. The Thunder function can be optionally
replaced by Two-Tone or disabled entirely with program jumpers. Another feature
allows cycling through Wail, Yelp, Thunder, and Standby by providing a signal to
the horn ring auxiliary wire when the function switch is in the Hands Free (HF)
position. A Park Kill option is provided for connection to a door switch, etc. to
disable the siren when exiting the vehicle. Radio and PA volume controls are
provided on the front panel. Also located on the front panel are two LED's for
speaker diagnostics.
This unit additionally contains several distinct controls for operation of vehicle
devices. A slide switch allows quick pursuit mode operation. The far right slide
position can be set up to activate maximum lights and siren for pursuit mode. There
are four push buttons to control four different lighting or auxiliary functions.
The front panel is backlighted with LED's for night visibility. This compact unit
utilizes short circuit, high voltage, low voltage, and reverse polarity protection
systems for maximum service life.
INSTALLATION
Proper installation of the unit is essential for years of safe, reliable operation.
Please read all instruction before installing the unit. Failure to follow these
instructions can cause serious damage to the unit or vehicle and may void
warranties.
Qualifications - The installer must have a firm knowledge of basic electricity,
vehicle electrical systems and emergency equipment.
Keep These Instructions - Keep these instructions in the vehicle or other safe place
for future reference. Advise the vehicle operator of the location.
Unpacking - Inspect contents for shipping damage. If found, alert carrier
immediately. Contents should include unit with microphone, mounting bracket w/ 2
bolts, microphone bracket with 2 screws, siren and light wiring harnesses with
connectors, and these instructions. Contact your supplier immediately if any
components are missing.
-2-