Cor Cordia Montageanleitung Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Inneneinrichtung Cor Cordia herunter. Cor Cordia 6 Seiten.

Seite drucken

Rocking func tion

The Cordia/Cordia Plus chair versions with a

middle column (item numbers 111, 112, 113,

114, 115, 116, 117, 121, 122m 123) all have a

rocking function. It can be tripped or locked by

the operator. The seat shell can be tipped back

by 10° after tripping. Locking of the rocking

function is only possible in the basic position.

For manufacturing reasons, the rocking function

always has small tolerances. This means that

there may be a bit of movement, which is not

a quality defect. When operating the tripping

lever for the rocking function, the upper body

must always be leaning slightly forward. Only

when the load is taken off the mechanics in

this way is the proper function possible.

Tripping the rocking function

To trip the rocking function, the trip lever must

be pushed back. Now the operator can rock

freely backwards in the chair (figure 1).

Locking the rocking function

To lock the rocking function (figure 2), the trip

lever must be pushed forwards. This makes the

seat shell rigid. Rocking back is no longer

possible.

Setting the spring

hardness of the rocking

func tion

The rocking function of the Cordia /Cordia Plus

chair can be adjusted in 3 spring hardnesses

(‹hard› – ‹middle› – ‹soft›). Ex works, the chair

is always delivered in the spring hardness

‹middle›.

• The spring hardness can be set at the bottom

of the rocking function using the 2 grub

screws (figures 3+4).

• Turning in the right direction with an enlosed

Allen key (in a bag under the seat) adjusts

the rocking function to the two other spring

settings ‹hard› or ‹soft›.

• The grub screws only need to be turned by

90° from one setting to the next. Do not

overturn, as this may damage the mechanics.

• The personal setting depends on the body

weight and personal preference

of the operator.

Seat height adjus tment

Cordia/Cordia Plus chair with 5-foot frame on

rollers

The trip lever of the 5-foot Cordia/Cordia Plus

chair on rollers (item numbers 111, 112, 115,

117) has the additional function of seat height

adjustment. Naturally, the rocking function (as

described above) can be operated here as well.

Pulling the lever up releases the gas pressure

spring in the rotating column and the operator

can set the seat height as required (figure 5).

Releasing the lever fixes the seat position again.

Attention: The gas pressure spring is subject to

pressure. Do not open, do not heat and do not

throw into naked flames!

Rollers

The 5-foot Cordia/Cordia Plus chair on rollers

is always equipped with braked rollers. The

rollers are braked while there is no load on the

chair. When the operator sits in the chair, the

brakes are released and the chair can be rol-

led/pushed. The brake force of the rollers can

be adjusted individually to the weight of the

operator using a screwdriver (figure 6).