Dynex DX-CR212 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Adapter Dynex DX-CR212 herunter. Dynex DX-CR212 13 Seiten. Lecteur de carte mémoire 11-en-1
Auch für Dynex DX-CR212: Handbuch (6 seiten), Häufig gestellte Fragen (5 seiten), Handbuch zur Schnelleinrichtung (2 seiten), (Englisch) Benutzerhandbuch (13 seiten), (German) Benutzerhandbuch (13 seiten)

To access a media card using Macintosh OS 10.4.x or higher:

1 Plug the USB cable into an open USB port on your Mac.

2 Insert a card into the appropriate slot, as shown in the table on page 4. A new drive

appears on the desktop.

Caution: Cards must be inserted into the correct slot and in the correct direction, otherwise

3 Double-click the new memory card icon. Use normal Mac procedures for opening,

copying, pasting, or deleting files and folders.

To remove a memory card using Macintosh:

1 When you have finished working with the files on the memory card, drag the memory

card icon to the Eject icon or click the memory card icon on the desktop and select

Eject.

2 Carefully remove the memory card.

Caution: Do not insert or remove memory cards while the blue data LED on the reader is

Data LED

Indicates when a slot is reading from or writing to a card.

• LED off–Your card reader is not being used

• LED on–A card is inserted in one of the slots

• LED flashing–Data is being transferred to or from a card and the hard drive, or another

card

Formatting a memory card (Windows)

Caution: Formatting a memory card permanently deletes all files on the card. Be sure that

If your computer has trouble recognizing a new memory card, format the memory card in

your device (refer to the documentation that came with the device) or by using the following

procedure.

To format a memory card:

1 Click Start, then click My Computer or Computer.

2 Right-click the appropriate memory card drive.

3 Select Format.

4 Type a name into the Volume Label box. The name of your memory card appears

next to the icon.

5 Click Start, then click OK in the Warning dialog box.

6 Click OK on the Format Complete window.

7 Click Close to finish.

you may damage the card and/or the slot. Cards inserted into the microSD and MS are

inserted label side UP. Cards inserted into the SD slot must be label side DOWN.

flashing. Doing so may cause damage to your card or loss of data.

you copy any valued files to a computer before formatting a memory card. Do not

disconnect the card reader or remove the memory card while formatting is in progress.

DX-CR212