Dynex DX-CR212 Häufig gestellte Fragen - Seite 2
Blättern Sie online oder laden Sie pdf Häufig gestellte Fragen für Adapter Dynex DX-CR212 herunter. Dynex DX-CR212 5 Seiten. Lecteur de carte mémoire 11-en-1
Auch für Dynex DX-CR212: Handbuch (6 seiten), Benutzerhandbuch (13 seiten), Handbuch zur Schnelleinrichtung (2 seiten), (Englisch) Benutzerhandbuch (13 seiten), (German) Benutzerhandbuch (13 seiten)
Seite drucken
Setup Questions
Question 1: How do I set up my card reader using Windows XP, Vista, or 7?
1. Plug the USB cable into an open USB port on your computer.
§
2. Insert a card into the appropriate slot. The blue LED lights.
Caution: Cards must be inserted into the correct slot and in the correct direction; otherwise,
you may damage the card and/or the slot.
§ Cards must be inserted label side down into the SD slot.
§ Cards must be inserted label side up in the MS and microSD slots.
3. Click Start, then click My Computer/Computer.
4. Double-click the appropriate drive to access the data on the memory card.
Question 2: How do I set up my card reader on a Mac?
1. Plug the USB cable into an open USB port on your Mac.
2. Insert a card into the appropriate slot. The blue LED lights and a new icon appears on the
desktop.
Caution: Cards must be inserted into the correct slot and in the correct direction; otherwise,
you may damage the card and/or the slot.
§ Cards must be inserted label side down into the SD slot.
§ Cards must be inserted label side up in the MS and microSD slots.
3. Double-click the new icon to access the data on the memory card.
Question 3: New Removable Disks do not appear in My Computer/Computer when I
connect my card reader to a Windows PC.
·
Make sure that your memory card is fully inserted into the slot on the card reader.
·
Make sure the card reader is connected to your computer. Unplug and reconnect your
USB cable.
·
Try a different memory card of the same type in the same slot. If a different memory card
works, the original memory card should be replaced.
·
Disconnect the USB cable from your card reader and shine a flashlight into the empty
card slots. Look to see if any pin inside is bent, then straighten bent pins with the tip of a
mechanical pencil. Replace your memory card reader if a pin has bent so much that it
touches another pin.
·
Unplug your card reader from the USB port and restart your computer. Reconnect your
card reader to your computer.
Question 4: When I insert a card into the card reader, no icon appears on my Mac
desktop.
·
Make sure that your memory card is fully inserted into the slot on the card reader.
·
Make sure the card reader is connected to your computer. Unplug and reconnect your
USB cable.
·
Try a different memory card of the same type in the same slot. If a different memory card
works, the original memory card should be replaced.
·
Disconnect the USB cable from your card reader and shine a flashlight into the empty
card slots. Look to see if any pin inside is bent, then straighten bent pins with the tip of a
mechanical pencil. Replace your memory card reader if a pin has bent so much that it
touches another pin.
·
Unplug your card reader from the USB port and restart your computer. Reconnect your
card reader to your computer.
·
The card may have been formatted in Windows FAT 32 format. Using a PC or digital
device, reformat the card using OS X-compatible FAT or FAT16 format.
Your computer automatically installs the correct drivers. A new Removable
Disk drive appears in My Computer/Computer.
2