Dynex DX-CR312 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Adapter Dynex DX-CR312 herunter. Dynex DX-CR312 13 Seiten. Lecteur de carte mémoire 20-en-1
Auch für Dynex DX-CR312: Handbuch (6 seiten), Häufig gestellte Fragen (5 seiten), Handbuch zur Schnelleinrichtung (2 seiten), (Englisch) Benutzerhandbuch (13 seiten), (German) Benutzerhandbuch (13 seiten)

To remove a memory card using Windows:

Caution: Do not insert or remove memory cards while the green data LED on the reader is

1 When you have finished working with the files on the memory card, right-click the

memory card drive in My Computer/Computer or Windows Explorer, then click Eject.

The data LED on the memory card reader turns off.

2 Carefully remove the memory card.

To access a memory card using Macintosh OS 10.4 or higher:

1 Plug one end of the USB cable into the card reader, then plug the other end of the USB

cable into an available USB port on your Mac.

2 Insert a card into the appropriate slot, as shown in the table on page 5. A new memory

card icon appears on the desktop.

Caution: Cards must be inserted into the correct slot label side up, otherwise you may

3 Double-click the new memory card icon. Use normal Mac procedures for opening,

copying, pasting, or deleting files and folders.

To remove a memory card using Macintosh:

1 When you have finished working with the files on the memory card, drag the memory

card icon to the Eject icon or click the memory card icon on the desktop and select

Eject.

2 Carefully remove the memory card.

Caution: Do not insert or remove memory cards while the green data LED on the reader is

Data LEDs

Indicates when a slot is reading from or writing to a card.

• LED off–Your card reader is not being used.

• LED on–A card is inserted in one of the slots.

• LED flashing–Data is being transferred to or from a card and the hard drive, or another

card.

Formatting a memory card (Windows)

Caution: Formatting a memory card permanently deletes all files on the card. Be sure that

If your computer has trouble recognizing a new memory card, format the memory card in

your device or by using the following procedure.

To format a memory card:

1 Click Start, then click My Computer or Computer.

2 Under Removable Storage, right-click the appropriate memory card drive.

3 Select Format.

flashing. Doing so may cause damage to your card or loss of data.

damage the card and/or the slot.

flashing. Doing so may cause damage to your card or loss of data.

you copy any valued files to a computer before formatting a memory card. Do not

disconnect the card reader or remove the memory card while formatting is in progress.

DX-CR312