Highway Equipment Company NEW LEADER G4 Wie prüfen - Seite 4

Blättern Sie online oder laden Sie pdf Wie prüfen für Streuwagen Highway Equipment Company NEW LEADER G4 herunter. Highway Equipment Company NEW LEADER G4 13 Seiten. Spread pattern

Seite drucken

SPINNER ASSEMBLY INSTALLATION CONTINUED

Figure C – Fin Location for 34" Conveyors

Figure D – Material Divider Installation

HIGHWAY EQUIPMENT COMPANY

RH 5. Make sure the fins are installed on the

spinner discs correctly. Position all fins in

the position 2 as shown in Figure C.

6. Set spinner RPM at 550-575 for compost

initially. These settings can be found using

the controller in the cab.

sensor will measure the spinner's speed.

7. Slide the slots of the material divider (Item

8) onto both sills so material divider's

mounting tab rests on sills' flanges. Align

two holes on outside of each sill with

material divider holes, insert capscrews

and loosely attach washers, lock washers

and nuts.

flanges with capscrews, lock washers and

nuts. Tighten all hardare.

The spinner

Secure mounting tab to sill'

305438-SP-A

Page Rev. A