Highway Equipment Company NEW LEADER G4 Wie prüfen - Seite 7

Blättern Sie online oder laden Sie pdf Wie prüfen für Streuwagen Highway Equipment Company NEW LEADER G4 herunter. Highway Equipment Company NEW LEADER G4 13 Seiten. Spread pattern

Seite drucken

It is recommended that a spread pattern test be performed for each product and application rate you

handle. Once initial testing is completed, testing should be repeated at the beginning of every season,

or any time maintenance is performed on any component affecting spread patterns.

SPREAD PATTERN TEST KIT

PART NO.

DESCRIPTION

300508

Spread Pattern Test Kit,

includes the following:

70890

Collection Tray

87200

Divider

300506

Rack – Tube

300507

Test Tubes

300505

Clip – Molded

87332

Funnel

Note: Larger containers will be needed.

SPREADER PREPARATION

The spreader to be tested shall be in good mechanical condition and properly adjusted according to the

Operation and Maintenance Manual.

All damaged and worn parts must be replaced. Spinner discs and blades must be free of any material

build-up, rust or paint.

Fill the hopper with the material to be spread. Run the material out to the end of the conveyor.

Set the feedgate to deliver the required rate per acre. Make sure the feedgate is level and the indicator

reflects the actual gate opening measured by standing a tape measure vertically in the fertilizer.

Adjust the spinner assembly by turning the crank. To begin testing, position the spinner at 3.5 for

compost.

TEST EQUIPMENT AND PROCEDURES

QTY

HIGHWAY EQUIPMENT COMPANY

PART NO.

DESCRIPTION

99418

Data Sheets

300503

Screw – #6-32 x 3/8

300504

Nut – Lock #6-32

70897

Flags

87199

Rope – 120' marked

87201

Stakes

QTY

100

305438-SP-A

Page Rev. A