CORA CS1030 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör CORA CS1030 herunter. CORA CS1030 19 Seiten. Wall receptacle outlet

User

Interface

The CS1030 user interface is shown in the figure below.

Figure 3 – Performing Network or Factory Reset on the Wall Outlet

The device provides one switched outlet and one always-on outlet, a 2.4A (5V) USB charger, an

LED Indicator, and a push button.

The Status LED on the front of the CS-1030 indicates the following status:

Action

One (1) quick press

Two (2) quick presses

Press and hold > 10 seconds

Press and hold > 25 seconds

CS1030 Long Range Wall Receptacle Outlet – User Guide

Description

Default toggles the switched outlet on/off.

Default turns on switched outlet for three minutes

Network Reset

Press and hold the SET button for 10 seconds, but less than 25,

then release. The device will reset all LoRaWAN Settings, which

does not affect device operation or configuration.

Factory Reset

Press and hold the SET button for > 25 seconds, then release.

The device will reset all parameters to factory defaults.

Following reboot, a Factory Reset event uplink (confirmed) will

be sent upon rejoining the LoRaWAN network.

Page 5