Agrowtek ADi Gebrauchs- und Wartungsanweisungen - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchs- und Wartungsanweisungen für Water Pump Agrowtek ADi herunter. Agrowtek ADi 11 Seiten.

Connection to SXHM Controller

Connect an ADi dosing pump directly to Agrowtek's SXHM hydroponics sensor to form a powerful, autono-

mous pH and EC set-point dosing system. Operate a single, dual or quad AgrowDose pump and configure

each pump as an EC part or pH up or down part. Automatically maintains pH and EC concentrations with a

simple repeating recipie dosing method.

A direct-link connection between a SXHM sensor and ADi pump requires Agrowtek's cross-over adapter.

IMPORTANT! ONLY use cross-over adapters provided by Agrowtek. Do not use other cross-over adapters or cross-over

cables unless they are constructed exactly as diagramed on the cross-over diagram. Incorrect cross-over adapters or cables

can cause damage to the equipment.

Please see the "MDX" product manual for more information on setting up and installing the MDX mini-dos-

ing system.

MDX System Instruction Manual

A custom cross-over cable can be constructed as an alternative to using the cross-over adapter and two

standard, straight Ethernet cables as shown in the diagram above. The cross-over wiring MUST match the

diagram below.

Pins 7 & 8 carry 24Vdc power and must be straight through or damage may result to the equipment.