AFL FOCIS Flex Kurzreferenz-Handbuch - Seite 6
Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Messgeräte AFL FOCIS Flex herunter. AFL FOCIS Flex 16 Seiten. Fiber optic connector inspection system
Seite druckenIn the Live Image mode, press the Capture key
•
– Auto Focus image (if the Auto Focus option is enabled)
– Capture the displayed image and enter the Captured Image mode
– Analyze image (if the Pass/Fail option is enabled)
– Save results and send image to Bluetooth-paired device (if auto-save and
auto-send enabled on "1st Capture Key", see page 12 for details)
– If auto-save or auto-send enabled on "2nd Capture Key" (see page 12),
press the Capture key again to save and/or send
In Captured Image mode, press the Capture key to return to Live Image mode.
•
In the Main Menu or Settings modes, press the Capture key to return to the most
•
recent Live or Captured Image mode.
The Main Menu is accessed from Live Image mode by pressing the Menu
While in the Main Menu, press Up/Down
•
(highlight) the desired menu option.
– Settings: Configure Auto Focus, Pass/Fail, Bluetooth, etc.
– Results Manager: Navigate and Review or Send saved test results
– Last Image: Recall most recently viewed image
– WiFi: Configure WiFi for remote access (future)
– Device Info: View serial number, software rev, etc.
Press Select or Right arrow key to display the selected option sub-screen.
•
While in a sub-screen, press Up/Down
•
the desired option.
– Press Select soft key or Right arrow key to edit highlighted parameter
– When selected parameter displays On/Off icon
enable/disable
Press Back soft key to return to the previous menu screen.
•
Capture Key Operation
User Settings and Controls
to perform the following:
arrow keys to navigate and select
arrow keys to navigate and highlight
/
6
soft key.
, press Select to