Coral UVCGY1 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Trockner Coral UVCGY1 herunter. Coral UVCGY1 18 Seiten. Coral uv sanitizer and dryer

Before First Use

The Coral UV Sanitizer and Dryer is cleaned with alcohol wipes before packaging and might have an

alcohol smell when first opened. Before using your Coral UV Sanitizer and Dryer for the first time, we

recommend that you first run the product as described below.

To set up the product for normal use, follow these steps.

1. Place the product on a flat, level surface with at least 5 inches (12.7 cm) of clearance between the

product and the wall.

This ensures proper ventilation clearance when the fan is running.

2. Push the PRESS button on the front of the product to open the lid.

3. Check that there is no damage to the bulbs. In the unlikely event the bulbs are damaged, please

4. Use a damp cloth and gently wipe the inside of the product. Then use a dry cloth to ensure there

are no water droplets remaining. Close the lid.

5. Press AUTO until the time display shows 50.

If there is no noticeable difference, run another 50 minute AUTO cycle.

6. After the cycle is complete, leave the product overnight with the lid open.

This is sufficient for first use. However, to freshen the product from packaging at the factory, place a

couple lemon or ginger slices in the chamber and run on AUTO for the longest cycle. See

Modes

for further details.

Coral UV Sanitizer and Dryer

Operation