Galvin Flowmatic Safe-Cell Produkt-Installations-Manualline - Seite 4

Blättern Sie online oder laden Sie pdf Produkt-Installations-Manualline für Sanitärprodukt Galvin Flowmatic Safe-Cell herunter. Galvin Flowmatic Safe-Cell 8 Seiten. Concealed dual temperature basin assembly with controller

Seite drucken

INSTALLATION

Avoid common installation errors :

Incorrect supply pipe size installed.

Non-compliance to Australian Standards.

Water pressure not tested before installation

1. Mount face plate

The stainless steel face plate is always

mounted flush to the wall.

Mount supplied Galv Inwall box into the wall

1 or 2mm below the finished wall surface.

The Galv Inwall box can be fixed to a masonry

wall or wall frame using screws suitable for the

fixing method. (Fasteners to be supplied by

installer).

We recommended that all cabling is fed

through 25mm conduit to make servicing and

replacment easier.

Apply a thin bead of silicon on the edge of the

wall cut out.

Fit the face plate to Galv Inwall box with

supplied screws, use supplied snake eye key.

If extension leads are required, please

contact Galvin Specialised.

Do not force the faceplate to fit onto wall or

attempt to dissamble components, as this

could result in damage to sensor push

button.

Version 2, 30 August 2017, Page 4 of 8

Lines not flushed before installation.

No access for service.

Valve not commissioned properly.

Connect solenoid

Connect solenoid assemblies to the outlet as



shown and in accordance with AS/NZS 3500.

Ensure that the solenoid is installed in the



correct direction (the arrow on the solenoid body

must align with the direction of water flow).

Line strainers are supplied attached to the



solenoid valves. Removal of these strainers may

void the warranty.

Ensure no thread tape, copper swarf, sand or

other debris enters and fouls the solenoid

valve.

Make sure solenoid valve is orientated such

that the electrical wiring is not twisted and

connectors are easily accessible.

Note: Refer to solenoid operating instructions

manual for installation and service maintenance.