Galvin Engineering CliniLever TCWSJ150C Installations-Manuale - Seite 4

Blättern Sie online oder laden Sie pdf Installations-Manuale für Sanitärprodukt Galvin Engineering CliniLever TCWSJ150C herunter. Galvin Engineering CliniLever TCWSJ150C 5 Seiten. Hospital wall sink set taps w/ 190 gooseneck outlet

Seite drucken

Product Installation Guidelines

5. Fit handle

−

Ensure the spindle is in the closed position

and firmly press the CliniLever

handle onto the spindle in the desired

orientation.

−

Check operation of CliniLever

handle. They should turn freely for a full ¼

turn.

−

Secure the handle in position using the

supplied washer and stainless steel cap

screw.

TROUBLESHOOTING

PROBLEM

Taps are dripping water

Water is leaking from spindle

Water is not flowing from tap

Spindle is difficult to turn

(jumper valve)

Handle is loose

Flange does not screw down

onto basin/sink surface

6. Fit water temperature indicator & testing

lever

CAUSE

Jumper valves are worn or damaged

Ceramic discs are worn or damaged

Tap seat is damaged

O-ring on jumper valve spindle is

damaged or worn

Water is turned off

Aerator or flow regulator is blocked by

debris

Obstruction on spout

Build up of scale on spindle, spindle

worn or o-ring has been damaged

Screw has come loose

Tap bodies are set too far out

−

Once CliniLever

lever handle is secure; fit the

appropriate water temperature indicator.

−

Once temperature indicator is fitted, check the

operation of the unit and inspect for any leaks.

RECTIFICATION

Replace jumper valve

Remove and inspect SBA.

Remove debris and/or

replace SBA if damaged.

Refurbish tap seat using a

reseating tool.

Replace o-ring

Turn water on

Remove aerator and/or flow

regulator from tap and remove

debris. Install an inline strainer.

Check if there are obstructions

hindering the water flow in the

spout and take it out.

Remove jumper valve, clean and

regrease. Replace o-ring.

Complete SBA may need to be

replaced.

Tighten handle screw

Re-position tap bodies and breach

piece

Document No.: 001.00.10.08

Version 1, 12 July 2022, Page 4 of 5