Galvin Engineering CliniMix Lead Safe 100.00.71.00 Produkt-Installations-Manualline - Seite 13

Blättern Sie online oder laden Sie pdf Produkt-Installations-Manualline für Sanitärprodukt Galvin Engineering CliniMix Lead Safe 100.00.71.00 herunter. Galvin Engineering CliniMix Lead Safe 100.00.71.00 18 Seiten. Hob mounted thermostatic progressive basin mixer - lever

Seite drucken

11.0

DISINFECTION

Swapping the hoses allows an engineer to feed water from the hot water source into the cold inlet. This hot water then passes

through the cold inlet, the thermostatic mixing chamber and out through the mixed water outlet.

Safety Note: Care should be taken when carrying out the following procedure to avoid contact with hot water and hot

surfaces. We recommend the use of protective hand wear.

1. Isolate water supply

− Turn oth handles clockwise until they're fully off.

3. Swap Hoses

− Swap the hoses. Attach the cold hose on the hot outlet and the hot hose on the cold outlet.

−

Turn the hot inlet tap anti-clockwise to enable hot water flow.

2. Remove hoses

− Using a spanner, turn both hose nuts anti-clockwise

and remove.

Version 2.1, 31

July 2020 , 13 of 18