Dynisco 1490 Betriebshandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Touch Panel Dynisco 1490 herunter. Dynisco 1490 20 Seiten. Din indicator
Auch für Dynisco 1490: Produkthandbuch (2 seiten)
Seite drucken
From lab to production,
providing a window into the process
Mounting Panel
Instrument
Housing
Ratchets
Gasket
NOTE: For an effective IP66 seal against dust and moisture, ensure
gasket is well compressed against the panel, with the 4 tongues located
in the same ratchet slot.
Rear Terminal Wiring
All connections to the device must be made through a spade format or similar
connection, with connection to the spade terminal touching both the insulation and
conductor material. (Use a standard crimping tool). Connections must be
mechanically secured so as to prevent any wiring becoming loose and coming in
contact with other wires or the instrument casing.
The above applies to any and all connection to hazardous mains supply, either direct
USE COPPER CONDUCTORS (EXCEPT FOR T/C INPUT)
Use Screened Cable on Retransmission Option 1
Single Strand wire gauge: Max 1.2mm (18SWG)
or indirect (e.g. via a switch or relay).
P/N: n/a
Rev: n/a
www.dynisco.com
-4-
1. Insert instrument into
the panel cut-out.
2. Hold front bezel
firmly (without
pressing on display
area), and re-fit
mounting clamp.
3. Push clamp forward,
using a tool if
necessary, until
gasket is
compressed
and instrument held
firmly in position.
ECO: n/a