AGS Merlin GDP2X Handbuch für Installation und Betrieb - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Betrieb für Gas-Detektoren AGS Merlin GDP2X herunter. AGS Merlin GDP2X 16 Seiten. Gas detection panel

Seite drucken

Installation & Operation Manual

Merlin GDP2X

Wiring the GDP2X

Mains supply must be connected by a

Always power down the panel when

competent person and according to

wiring external circuits to prevent

any regulations.

damage to electronics.

MAINS POWER CONNECTION

100-120V AC mains power should be supplied to the [POWER/LINE IN] connector using a 3 core

cable and fused at 3A.

On connecting the mains supply to the panel the power LED indicator will light up – this is

located on the front cover (red dot on the AGS Logo).

VALVE OUTPUT

100-120V AC electrical power supplied from the [VALVE OUT] connector

using a 3 core cable can be connected to a gas solenoid valve which can

shut the gas supply on alarm status.

Refer to your valve manual for more information and wiring!

GAS DETECTORS

A 12-24V power and data supply to gas detectors are wired to [DETECTOR CHAIN] connectors.

AGSGDP2X - IOM Iss: 3 03-20