Coram Showers 800 Schnellstart-Handbuch - Seite 8
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Armaturen für das Badezimmer Coram Showers 800 herunter. Coram Showers 800 8 Seiten. Shower enclosure
15
Attach 4 x bumpstops (PN60521) to the holes at the ends of the top and bottom rails using 10mm screws and screw covers.
Ensure they are fitted the correct way up as shown. Note: If fitted incorrectly, they could cause the doors to jump out of the rail.
16
From the outside only, apply sealant to the bottom of the enclosure and 50mm up the wall channels and vertical joints
as shown.
Packaging:- The cardboard and polythene parts of this packaging can be recycled.
End of life:- This product contains materials such as aluminium and glass which can be recycled.
IMPORTANT: You must not use the shower for 24 hours after installation of the enclosure.
DO NOT use bleach, scouring powders, solvents or other aggressive cleaning agents. To clean, use warm soapy water and a
clean cloth and rinse off.
Please note: There has been a glass coating applied to this product, use a squeegee to remove water and debris.
Periodically check all fixings and tighten if necessary.
Stanmore Industrial Estate, Bridgnorth, Shropshire WV15 5HP, UK • Tel: 01746 766466 • Fax: 01746 764140 • www.coram.co.uk
Please contact your local authority to find your nearest recycling centre.
CORAM SHOWERS LTD
PN60521
10mm
Recycling
50mm