AGS MERLIN CO2-TFT Handbuch für Installation, Betrieb und Wartung - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Installation, Betrieb und Wartung für Messgeräte AGS MERLIN CO2-TFT herunter. AGS MERLIN CO2-TFT 16 Seiten. Carbon dioxide & temperature monitor

Seite drucken

Installation, Operation & Maintenance Manual

INSTALLATION

Planning

Area of coverage

Consider the coverage required and function of the area. Emphasis should be placed on airflow patterns

and correct placement, not perceived detecting ranges. The target gas will only be identified when

contact is made with the sensing element itself.

Your monitor should be installed in populated areas that risk high concentrations of CO

temperatures e.g. educational and government buildings including laboratories and commercial kitchens.

Areas to avoid

Avoid conditions of any other environmental factors that could potentially impede the accuracy and

operation of the detectors such as; condensation; vibration; extreme temperatures, pressure, presence of

other gases, electromagnetic interference and draft zones.

Take in to account the design of the air flow within the zone area. Avoid conditions such as; condensation;

vibration; extreme temperatures and draft zones.

Multiple monitors may be required to adequately protect property and/or persons!

Typical Positioning

Avoid positioning near draft areas (windows and door entrances).

Where possible, monitors must be fixed in such a position as to allow natural air circulation.

Laboratories/educational buildings: Seated head height



Commercial kitchens: 1700mm (5.6ft) from ground level



These recommended heights may vary based on air flow and temperature conditions in addition to the

proposed application and location.

Installation Arrangement

Rev 3 11-20

CO2-TFT

gas or varied