Coram Showers OPTIMA Series Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch für Duschkabinen Coram Showers OPTIMA Series herunter. Coram Showers OPTIMA Series 16 Seiten.

From inside

Check the door frame is vertical and is centrally positioned between the wall channels.

From inside the enclosure, in the positions shown, drill through the wall channels into the fixed panel and magnetic profiles using

a 3mm drill bit, do not drill too deep!

Fix using 6 x 10mm screws and screw caps.

PN40260

PN4745

Fit 'flipper seal' (PN40260) onto the edge of the fixed panel.

Ensure the flipper seal 'flap' is on the inside.

Note: Wetting the glass with water will help to fit the seal.

From inside the enclosure, tighten all 2 fixed panel bracket

grub screws onto the glass using the allen key - do not

overtighten. Fit the cover caps (PN4745) into the holes.

Inside

PN40259

Push fit 'flipper seal' (PN40259) onto the back edge of the door.

Ensure the flipper seal 'flap' is on the outside of the door.

Test the 'magnetic seal' (PN40258) against the 'magnetic

profile' to ensure it is the correct way around. Push fit

magnetic seal onto the closing edge of the door (the same

side as door handle hole).

Note: Wetting the glass with water will help to fit the seals.

ø 3

10mm

PN40258

Outside

face of

door

Door

handle

hole