CORBERO E-CFMMB42BL Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Handbuch für Kühlschrank CORBERO E-CFMMB42BL herunter. CORBERO E-CFMMB42BL 19 Seiten.

(1)Calculation on the basis of results for 24 hours under standard test conditions.

The actual energy consumption will depend on use and the location of the device.

DESCRIPTION OF THE DEVICE

1. Top hinge cover

2. Door bin

3. Bottle bin

4. Adjustable foot

5. Shelf

6. Tray

7. Thermostat knob

NOTE:The appliance design is subject to change without prior notice.

USE

• This appliance is designed to operate in ambient temperature between 16°C and

38°C. If these temperatures are exceeded, i.e. colder or warmer, the appliance will

not operate correctly.

Remove all packaging materials from the appliance. Wash the inside of the cabinet

•

with lukewarm water and bicarbonate of soda (5ml to 0.5liter of water). Dry the

appliance thoroughly.

•

When you use the fridge for the first time or after defrosting,set the thermostat

control to the maximum position for at least 2 hours before introducing food to be

stored, and then readjust to the normal position.

•

If there is a power failure, do not open the door.Frozen food should not be affected

if the failure lasts for less than 12 hours.If the failure is longer, then the food should

be checked and either eaten immediately or cooked and then re-frozen.

SETTING THE THERMOSTAT KNOB

The refrigerator is controlled with a thermostat knob located inside the fridge,

towards the upper right-hand corner. Turn the knob from the STOP (OFF) position

towards the higher numbers for colder temperatures.The knob can be adjusted from

setting 1 to 6.

Higher settings on the knob (6) mean lower temperatures (colder) in all

compartments of the appliance.

Changes of the ambient temperature affect temperature in the interior of the

appliance so choose a correct setting of the temperature control knob, depending on

your ambient conditions.

In the STOP (OFF) position the appliance does not operate(the cooling system is

switched off), but power supply is not interrupted.