Hikmicro HM-TD2H37T-7/X Schnellstart-Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Wärmebildkameras Hikmicro HM-TD2H37T-7/X herunter. Hikmicro HM-TD2H37T-7/X 9 Seiten. Heat resistant bullet camera

Seite drucken

2. Connect ③ (G1/2 air outlet) and ④ (G1/4 air inlet) with ⑤

(adapter), then the compressed air can remove the dust on the

device window.

Figure 3-9 Dedusting Installation

3. Wrap the screwed pipe with thermal insulation materials.

Aerogel and aluminum silicate are recommended.

3.3.2 Water Cooling and Dedusting Installation

You can introduce cooling water to reduce the cavity

temperature of the device.

Steps:

1. Connect the cooling water outlet and ⑥ (G1/2 water inlet) at

the bottom of the device with ② (one G1/2 screwed pipe),

and connect the backwater inlet and ⑦ (G1/2 water outlet) on

the top of the device with ② (the other G1/2 screwed pipe).

Heat Resistant Bullet Camera · Quick Start Guide

Figure 3-10 Pipe Connection for Water Cooling

Note:

Make sure the sealing gaskets at the ends of the pipes are well

installed, or the waterproof effect may be affected.

2. Connect the compressed air outlet and ④ (G1/4 air inlet) at

the top of the device with ⑧ (G1/4 screwed pipe), then the

compressed air can remove the dust on the device window.

Figure 3-11 Dedusting Installation

Note:

The length of the screwed pipe in the package is 1 m, and you

can purchase the pipe according to the actual installation

requirement.

3. Wrap the three screwed pipes with thermal insulation

materials. Aerogel and aluminum silicate are recommended.

4 Activate and Access Network Camera

Visit www.hikmicrotech.com to download and install HIKMICRO

Studio. Refer to the user manual of the device for detailed

operation.

Legal Information

reserved.

About this Manual

The Manual includes instructions for using and managing the

Product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The

information contained in the Manual is subject to change,

without notice, due to firmware updates or other reasons.

Please find the latest version of this Manual at the HIKMICRO

website (www.hikmicrotech.com/).

Please use this Manual with the guidance and assistance of

professionals trained in supporting the Product.

Trademarks Acknowledgement

and other HIKMICRO's trademarks and logos are

the properties of HIKMICRO in various jurisdictions.

Other trademarks and logos mentioned are the properties of

their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS"

AND "WITH ALL FAULTS AND ERRORS". HIKMICRO MAKES NO

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT

LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR

FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE

PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL

HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL,

CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS

PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,

CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING