Dynojet Power Commander III USB EX Einbauanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Einbauanleitung für Kontrolleinheit Dynojet Power Commander III USB EX herunter. Dynojet Power Commander III USB EX 4 Seiten. 2000-2001 honda
Auch für Dynojet Power Commander III USB EX: Einbauanleitung (3 seiten), Einbauanleitung (3 seiten), Einbauanleitung (3 seiten), Einbauanleitung (3 seiten)

Seite drucken
PCIII USB EX
harness
i115-411EX
remove these bolts
PCIII USB EX
harness
fuel tank stop bracket
PCIII USB EX
harness
The ignition must be turned OFF before
installation.
1
Remove the main seat and the passenger seat.
2
Remove the fuel tank cover.
3
Remove the two bolts for the rear tail section
as shown in Figure A.
4
Remove the left hand side mid fairing.
5
Temporarily lay the PCIII USB EX in the tail
section.
6
Route the harness towards the front of the
bike. Keep the harness between the outside of
the sub frame and inside the tail section as
shown in Figure B.
Gently pull out on the lower left hand side of
the tail section to allow room for the harness.
Route the harness between the battery and the
sub frame and towards the throttle bodies.
7
Remove the fuel tank stop bracket and route
the PCIII USB EX harness underneath it.
2003-2004 Honda CBR600RR - PCIII USB EX - 2