Gama Sonic BAYTOWN II 105BSG21 Gebrauchsanweisung - Seite 3
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Lantern Gama Sonic BAYTOWN II 105BSG21 herunter. Gama Sonic BAYTOWN II 105BSG21 4 Seiten. Bulb solar lamp post
Seite drucken
Assembly Instructions:
1
. Attach the body (D) to
the stem(E) with the four
supplied screws, as shown.
C
D+E
3.
Install the
bulb and turn
bulb and turn
on switch
to desired
setting
B
C+D+E
5.
Attach Side handles
provided.
7.
Assemble pole by screwing the four pieces together.
Assemble pole by screwing the four pieces together.
page 3
D
E
2.
Place the lens and
cone (C) into the
body (D+E).
Operation Switch
Operation Switch
Operation Switch
4.
Attach top (B) to the
Attach top (B) to the
body (C+D+E) with
body (C+D+E) with
the two supplied
screw caps
6.
Screw Finial to the top.
Screw Finial to the top.
Installation on flat surface
(Without the Anchor):
8.1.
Mark three holes using the
base plate as a template.
Use electric drill to make the
holes. Place anchors in holes
and secure with screws .
8.2.
Attach the three
decorative caps provided.
Continue by screwing the
pole to the base.
EZ Anchor
EZ Anchor
Installation
Installation
Instructions:
Instructions:
9.1.
9.1
Attach Part
(G) to Part (H)
(G) to Part (H)
Using the four
Using the four
small screws from,
small screws from,
as shown
as shown
9.2.
9.2.
Insert the
Turning bar (I) in
Turning bar (I) in
the hole through
the hole through
the anchor stake
the anchor stake
(G+H) as shown.
(G+H) as shown.
9.3.
Place anchor in desired location
and apply downward pressure while
turning the Turning bar clock wise.
9.4
9.4
Occasionally check the
Occasionally check the
anchor Level Tool to ensure
anchor Level Tool to ensure
your Post is straight.
your Post is straight.
9.5
9.5
Stop turning once Part (G) is flush with
ground.
ground.
9.6
9.6
Remove the Turning Bar (I).
9.7
9.7
Screw the Pole to the Anchor.
G
H
I
G+H