Corbin Russwin Access 800 Anleitung zum Programmieren - Seite 10
Blättern Sie online oder laden Sie pdf Anleitung zum Programmieren für Durch Schlösser Corbin Russwin Access 800 herunter. Corbin Russwin Access 800 16 Seiten. Cl33800 tcac2 series cylindrical lockset
Auch für Corbin Russwin Access 800: Installationsanleitung Handbuch (17 seiten), Installationsanleitung Handbuch (16 seiten)
Seite drucken
Access 800
Series
™
Locks
Keypad Programming Instructions
M801, M803, M804, M806 Programming
5
To Activate The RF FOB Function
Note: Press and hold for 3 seconds the button on the RF FOB. If the controller
beeps and the LEDs flash, the RF FOB function is enabled and this procedure
does not have to be completed. With the RF FOB function enabled the battery
life of the unit will be reduced.
Press the white reset button located in
the battery compartment and any front
keypad key at the same time and hold
for 1 second, then release buttons.
Enter code 1030#
1#
1# (to Enable) or 0# (to Disable)
*
*
*
Enter a Card, Tag, Fob and RF FOB User
99# Master Code or Supervisor Code*
50# (See Table Below)# (User Location 03-2000)#
*
*
Present Card, Tag, FOB or RF FOB
*
*
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Copyright © 2018-2019 Corbin Russwin, Inc., an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
Yellow LED blinks
Yellow LED blinks
Yellow LED blinks
Yellow LED blinks
Yellow LED blinks quickly
Yellow LED blinks slowly
Yellow LED goes out
Yellow LED blinks
Yellow LED blinks
Yellow LED blinks quickly
Yellow LED blinks slowly
BEEP / Yellow LED blinks
Yellow LED blinks slowly
Yellow LED goes out
10
(617417440) FM359 7/19