aireRyder F0048 Montage- und Installationshandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Montage- und Installationshandbuch für Fan aireRyder F0048 herunter. aireRyder F0048 9 Seiten.
Seite drucken
Screw
Motor
Fan Screw
Fan Light Kit
Forward
Reverse
Fig.17
Note:
This remote control has memory function setting. The fan will
operate at the same speed and the fan light will stay at the same
brightness as the last time the power supply was turned off.
This remote control can not be worked along with other solid-state
speed control or dimmer at the same time
Fig.13a
Motor
Blade Holder
Blade Holder Edge Angle
Blade Screw
Blade Angle Edge
Fig.13b
Fan Blade
Fig.14
Connect the female terminals from motor to male terminals
from fan light kit.
secure the fan light kit to the motor by fan screws.
Motor
Note: 1). The blue fixture wire to blue motor wire;
Female terminal
CAUTION :Handle the light kit gently during installing. In order
Male terminal
The slide switch on motor
Fig.15
assembly sets direction of
fan rotation. Select the
Slide Switch
desired direction of fan
rotation. Push the slide
Motor
switch left for " Forward"
and right for "Reverse".
Note: Wait for fan to
stop before reversing
the direction of blade
rotation.
Battery
Battery Cover
Align holes and fasten blade holder to the
motor with screws.Then align holes and
fasten blade to the blade holder with blade
screws.Repeat for remaining blades and blade
holders (Fig.12a).
Suggest: Using magnetic Philips screwdriver.
NOTE: The blade outside edge angle and
2). The orange fixture wire to orange motor wire;
3). The white fixture wire to white motor wire;
to avoid noise please keep crystalls tightly.
1. Install the battery (9V) to the transmitter.
2. OPERATING TRANSMITTER:
* Press "HI" to turn on the fan at high speed.
* Press "MED" button to turn the fan in medium speed.
* Press "LOW" button to turn the fan in low speed.
* Press "OFF" button to turn off the fan.
* Press and release the "Accent" button quickly to turn
on or turn off the accent light.
* Press and hold the "Main" button to
to the desired level and release, and the brightness level
will be memorized. Turn on the main light again, then fan
light will restore on of the brightness level which was
dimmed last time.
NOTE: Accent light is non-dimmable. Main light is
dimmable.
PAGE: 7 / 9
blade holder outside edge angle
must be same(Fig.12b).
Fig.16
Turn ON the electric circuit at the
main fuse or circuit breaker box.
dim or brighten lights
181128