Dea NET-BOX Betriebsanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Controller Dea NET-BOX herunter. Dea NET-BOX 6 Seiten. Netlink radio control and device programmer

Seite drucken

5 CONNECTORS AND SIGNAL LED

Connectors, signal LEDs and the reset button are frond on the front:

• R.PROG is the GT-CABLE (art.470351) port used to edit compatible radio controls (GTI, GTIM, GTI/868, GT, GTM, GT/868,

TR and TS series). A new serial number can be entered or the encryption key used in radio transmissions changed via this

cable. For GTIM and GTM versions, these operations can be completed by placing the transmitter in the area of the NET-BOX

marked with the DEA logo and pressing the T1 and T2 keys simultaneously.

• USB is the PC Windows connection port. Install "DEAconnect" software to enable communications with DEAcloud.

• UART1 is the removable terminal to connect the DEA device to be programmed. Secure the cable with the new (art.

397227) or previous (art. 397223) MOLEX tray following the instructions below:

UA: Green, UB: Yellow, G: White.

The UART2 terminal is found in the NET-BOX internal circuit to connect a second device matching the cable colours.

• LAN is the port that can be used to connect NET-BOX to a router with internet connections. This way the devices can be

remotely controlled.

• P1 is the reset button.

• L1-4 are signal LEDs vertically aligned to the right of the micro-USB port.

L1 (green): If left on for more than 5s, every 10s it indicates that NET-BOX is connected to DEAcloud via LAN port or compatible

accessory.

L2 (yellow): on when updating NET-BOX ﬁ rmware.

L3 (red): ﬂ ashes to indicate it received a message from DEAcloud.

L4 (green): if ﬂ ashes every 10s when NET-BOX is powered. It remains on when the connection between DEAcloud and a

device connected to NET-BOX is active.

6 RESET PROCEDURE

STANDARD RESET

This procedure allows you to delete the installer account ID reference from the NET-BOX memory. This operation also

eliminates all programming data relating to any connected devices. With NET-BOX switched off, press P1, power the board

keeping the button pressed and release it when the LEDs L1, L2, L3 and L4 are lit and the buzzer is activated (about 10s).

COMPLETE RESET

This procedure deletes all the data provided in the standard reset and sets the APN of any MODEM accessory to the standard

value with SIM DEA. In addition, the LAN port is enabled with DHCP enabled. To carry out this reset after the LEDs light up

from the STANDARD procedure, keep the pressure of P1 for a further 10s until the buzzer is deactivated. Release P1 and wait

for the board to restart.

7 DEAcloud

DEAcloud is the web portal dedicated to professionals that allows you to simply and efﬁ ciently managed DEA product

installations compatible with the NETLINK system.

If NET-BOX is not connected to Internet via LAN port or speciﬁ c accessory, "DEAconnect" software can be used to enable

communications between NET-BOX connected via USB to a PC Windows and DEAcloud portal.

EN-2