Cord ezi-dab Benutzerhandbuch - Seite 16
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Radio Cord ezi-dab herunter. Cord ezi-dab 19 Seiten.
Seite druckenTroubleshooting
If you experience any difficulties with the operation of your CORD Ezi Dab, please
check the table below before contacting an authorised CORD sercive centre:
Problem
No Power
Poor Radio Reception
Interference to Radio Re-
ception
Continuous or intermittant
hissing sound from radio
playback
Bubbling sound is heard
Remote Control does not
operate
Possible Cause
•
AC Power Cord is out
•
AC socket switch is off
•
No Antenna is con-
nected
•
The antenna is not
positioned for the best
reception
•
The frequency of the
desired station is not
tuned in.
•
Weak signal or fringe
reception area
•
Noise related to influ-
ence of an electric ap-
plicance
•
Noice related to a
nearby television set
•
Weak signal or fringe
reception area
•
Weak signal or fringe
reception area
•
Battery is not loaded
correctly, or has gone
flat.
Remedy
•
Connect the AC cord
•
Switch ON the AC
socket
•
Connect the Antenna
•
Change the position of
the antenna
•
Tune in the frequency
of the desired radio sta-
tion
•
Install an outdoor exter-
nal antenna
•
Turn off the power to
the interfering appli-
ance
•
Install this unit further
away from the TV set
•
Change the position of
the antenna
•
install an outdoor exter-
nal antenna
•
Change the position of
the antenna
•
install an outdoor exter-
nal antenna
•
Replace the battery
•
Remove obstacles from
IR path to unit
15