Frigidaire FEC32C4AC1 Installationsanleitung Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Kochfeld Frigidaire FEC32C4AC1 herunter. Frigidaire FEC32C4AC1 20 Seiten. Electric cooktop
Auch für Frigidaire FEC32C4AC1: Teilekatalog (6 seiten)
Seite drucken
Cooktop
Installation
1. All Ceramic-Glass Cooktops
Visually inspect the cooktop for damage. Also make
sure all cooktop screws are tight (see Figure 8).
SCREWS
Figure 8
Set the cooktop into the countertop cutout.
NOTE: Do not use caulking compound; cooktop
should be removable for service when needed.
Do not remove
the nylon
spacers on
the edges of the cooktop.
These
spacers center
the
cooktop
in the space provided.
The cooktop
must
be centered
to prevent
excess heat buildup
that
may result in heat damage
or fire (see Figure
9).
6 NYLON SPACERS
The retainer brackets MUST be installed, to meet
local codes or, in their absence, with the National
Electrical Code ANSI/NFPA No. 70--latest
edition,
or with CSA Standard C22.1, Canadian Electrical
Code, Part I (see Figure 10).
COOKTOP
COUNTERTOP
Retainer Brackets Must Be
Installed At Lest 1/16"
(O.16 cm) BELOW
Countertop
SPACER
_
RETAINER
BRACKET
Figure 10
2. Models: 26" and 36" (36"X18")
Coil Elements
Cooktops
Set the cooktop into the contertop cutout. Lift the
cooktop and fasten the ends of the box to the counter
with wood screws (figure 11). Lower the cooktop.
Align the knobs on the shafts and press down with
even pressure. After setting the unit into the opening,
all remaining work must be done from inside the
cabinet.
_BURNER
BOX
Figure 11
3. Models: 32" Coil Elements Cooktops
1. Place cooktop into countertop
opening and
center unit in cutout.
2. Remove all surface units and drip bowls.
3. Unit clamp down information.
Once unit is
installed in counter opening, you must clamp unit
down as shown in figure 12.
4. Put back all surface units and drip bowls.
5. Make electrical connections as outlined in
"Electrical Connection"
section.
5