Airespace AS 1500 Handbuch zur Schnellinstallation - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Drahtloser Zugangspunkt Airespace AS 1500 herunter. Airespace AS 1500 15 Seiten. Intelligent rf ap

Seite drucken

•

DO NOT MOUNT Airespace Access Point ANTENNAS WITHIN ONE METER (3 FT.) OF ANY METAL

OBSTRUCTIONS. THE RF WAVES FROM Airespace Access Points ARE BLOCKED AND/OR

REFLECTED BY METAL OBJECTS, such as metal HVAC ducts, conduit, pipes, bookcases, elevator

shafts, stairwells, and metal walls. REFER TO THE

BEFORE MOUNTING Airespace APs NEAR METAL OBSTRUCTIONS.

Overview

This guide is designed to provide you with the information needed to mount AS 1500 Airespace Access

Points (Airespace APs). Airespace APs are part of the innovative Airespace Wireless Enterprise Platform

(Airespace System), and require no manual configuration after they are mounted.

This document assumes that a site survey has been performed as described in the

Point Deployment Guide

selected, and that you have one Airespace AP per indicated location.

After the site survey is done, you should have a map indicating the following:

•

AP locations in the middle of a ceiling or hallway.

•

AP power options: power supplied by the AC-to-DC power supply orderable from the factory, or

Power over Ethernet (PoE) from the Airespace WLAN Switch, another network device, or a PoE

injector/hub (usually located in a wiring closet).

Plenum-mounted Airespace APs and REAPs MUST BE powered using Power

Note:

Over Ethernet (POE) to comply with safety regulations.

If you do not have a map, make one so you can record the MAC addresses from each location and

return them to the to the person who is planning or managing this wireless network.

Refer to the following sections to install the Airespace APs.

When mounting Airespace APs, make sure to maintain a 20 cm (8 in.) separa-

Note:

tion between the Airespace APs and bystanders to comply with FCC RF exposure

regulations. Refer to the

information.

For more details about Airespace AP installations, refer to the

document.

Step 1: Collecting Required Tools and Supplies

•

One Airespace AP per location with included mounting clips.

•

Optional Airespace AP Mounting Kits, factory-orderable.

•

Optional external AC-to-DC power supplies, factory-orderable.

•

Map showing Airespace AP locations and power options.

•

Screwdrivers, drills, and ladder.

•

CAT-5 (or higher) cables to connect the Airespace AP locations and the Airespace WLAN Switch

or other network device.

Continue with

Step 2: Configuring the Airespace AP Before

12/29/04

90-100tbd-000 Rev 1 (Preliminary 3)

section in the

Airespace Product

FCC Statements for Airespace APs

Airespace Access Point Deployment Guide

Guide, that Airespace AP locations have been

section for more

Planning Notes

section at the end of this

Step 1: Collecting Required Tools and Supplies

Installation.

Overview

Airespace Access