GAME 4302 Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Thermometer GAME 4302 herunter. GAME 4302 2 Seiten. Digital wireless thermometer

Seite drucken

RECEIVER

Front View

1. Transmitter battery strength

2. Temperature

3. Temperature scale

4. Receiver battery strength

5. Signal indicator

Top Buttons Functions

1. Transmitter pairing button

2. Screen light

3. C°/F° button

Receiver Back View

1. Battery compartment

2. Wall mounts

Note

• Always read the owner's manual carefully before operating the unit.

• Avoid placing the receiver near interference sources/metal frames such as computer

or TV sets.

• To help conserve batteries and ensure the longest and most accurate product

function, the transmitter Unit transmits every 2.5 minutes if the temperature change

is 0.5°C/1.1°F or more from the last reading. If the temperature change is less than

0.5°C/1.1°F, the transmitter unit will still transmit every 60 minutes in order to main-

tain connection. If the Receiver fails to receive a signal within 3 hours, the transmitter

Icon will flash, indicating a problem with signal reception.

• Rechargeable batteries rated at less than 1.5 VDC (such as 1.2 VDC rechargeable cells)

may adversely affect product range, accuracy, and performance.

WIRELESS TRANSMITTER

Transmitter Front View

1. C°/F° button

2. Battery strength indicator

3. Temperature

4. LCD temperature display

5. Transmitter icon

6. Transmitter pairing button

7. Battery cover

8. Data transmitter LED indicator

Exploded View

1. Battery Cover

2. Transmitter Body

3. Transmitter Cover

4. Tether loops (2)

SPECIFICATIONS

Range of temperature measurement:

Receiver

Remote transmitter

Transmission

Resolution

Battery life

-0 °C to 50 °C (32°F to 122°F)

-50 °C to 70 °C (-58°F to 158°F)

100M (300 ft.) open area, RF 433 MHz

0.1 degree

3 months (alkaline batteries recommended)

RECEIVER BATTERY INSTALLATION

For first time installation, always insert batteries in the receiver display unit and then

the remote transmitter. The receiver will seek a transmitter within range.

1. Open the battery cover of the back unit.

2. Install three (3) AAA batteries according to polarity indicated.

3. Replace the batteries compartment cover

SETTING UP THE WIRELESS TRANSMITTER

1. Attach the transmitter cover to the transmitter body

2. Place the transmitter as close to the receiver as possible.

3. Remove the battery cap.

4. Install three (3) AAA batteries according to polarity indicated.

5. Screw and tighten the battery cap.

6. The red LED on the transmitter will flash when it transmits a signal. Temperature of

the transmitter will be updated and displayed on the transmitter's LCD.

7. Press the "°C/°F" button on the back of the transmitter to change from Fahrenheit to

Celsius.

NOTE: If the transmitter and receiver fail to automatically pair, bring the two units close

together, and press the transmitter button on the receiver for 8 seconds, and then

press the transmitter button on the transmitter for 1 second.

8. Place the transmitter into the water to be tested, and check for signal reception

at the receiver. For most consistent results, tether the transmitter using the tether

loops, and an appropriate length of water, UV, and chemical resistant string.

LOW BATTERY INDICATOR/REPLACING BATTERIES

There are two low battery indication on the receiver and one on the transmitter. A low

battery warning icon will appear on the transmitter screen and on the receiver screen.

When the low battery indicator appears, replace the batteries in both the transmitter

and receiver. Follow the setup procedure above.

After replacing the batteries, re-pair the receiver with the transmitter by pressing the

transmitter pairing button (#6) once.

Note

• Do not mix old and new batteries.

• Clean the battery contacts and also those of the devices prior

• Do not dispose batteries into fire. Batteries may explode or leak.

to battery installation.

• Do not mix alkaline standard (carbon-zinc), or rechargeable

• The supply terminal is not to be short circuited (+) (-).

(nickel-cadium) batteries.

• Non-rechargeable batteries are not to be recharged.

• Replace batteries ensuring the correct battery type, and as

• Batteries are to be inserted with the correct polarity.

a simultaneous act.

• Remove exhausted batteries promptly and dispose of properly.

• Remove batteries if product is to be left unused for a long time.