Deagostini Model Space HUMMER H1 Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Spielzeug Deagostini Model Space HUMMER H1 herunter. Deagostini Model Space HUMMER H1 18 Seiten.

HUMMER H1: STEP BY STEP

The power switch and battery box

1 1

The battery box and power switch is located inside the radio box, which

will be fitted to the base of the chassis in coming stages. The box is

pictured open here, but during operation is sealed shut using body pins.

This is to prevent dust and dirt getting inside the components, which can

affect the operation of the parts.

The aerial

1 1

This is the aerial, pictured in its position in the centre of the chassis

with the body frame and panels removed. The length of the wire

will be cut depending on the radio frequency used by the remote

control, but should not be so long that it is folded up, as this will

disturb the signal.

3 3

From the front, you can get

an idea of how the aerial

will reach up to the roof

and curve over. This means

that, unlike most RC cars, it

isn't necessary to cut a hole

in the roof for the aerial.

206

2 2

The power supply in your Hummer H1 uses alkaline AA

batteries. It is useful to acquire a battery power checker like the

one in the photo above, to check the power level before fitting

replacement batteries.

2 2

Whatever length the aerial is cut to, it will be taller than the roof of

the body panels. This is not an issue, as the soft resin tubing of the

aerial will bend sufficiently to fit inside the body.

4 4

Fitting the body frame and

panels is straightforward.

Simply lower over the chassis

and aerial carefully, then clip

into place with pins, ready for

action.

™