Jaen Siracusa 15E Handbuch - Seite 19

Blättern Sie online oder laden Sie pdf Handbuch für Zubehör für Musikinstrumente Jaen Siracusa 15E herunter. Jaen Siracusa 15E 20 Seiten.

Seite drucken

Specifications

Variable Materials:
Wood: Usually Maple and Spruce for the soundbox and Maple for the
neck. The fretboard, peghead face, bridge and tailpiece are usually
made of Ebony. The pickguard skin is made of Ziricote most times (its
core is always carbon), and the pickups are usually made of Ziricote
or Ebony.
The bindings are usually Maple or Ovangkol, and the purfling is
usually fiber.
Most metal parts are gold plated.
The finish since 01/2022 is epoxy+Tru-oil (Birchwood-Casey). In some
cases it can be nitrocellulose (Votteler).
Fixed Materials:
Carbon: The truss rod access cover, tuning machines cover, pickguard
bracket and tailpiece bracket are all carbon with a glued lamination of
wood, usually Ebony. The peghead has two internal carbon
reinforcements where the tuners are attached. There is also a carbon
skeleton inside the saddle that stiffens it.
made of carbon fiber and ebony and joined by a carbon fiber rod.
pickguard has a carbon core hidden below its wooden skin.
The frets are Jescar FW47104SS, Stainless Steel.
The nut is made of cow bone.
The tuning machines are Schertlers, modified so that their
mechanisms are hidden inside the peghead, usually with Ebony knobs.
Potentiometers: long rotational life (100.000 cycles), conductive
polymer.
Measurements:
Neck: The scale is usually 25.5" (648 mm), while the nut width is
usually 1
11/16
The nut width may be 1
Soundbox depth: usually around 65-70 mm.
Siracusa 15R: 15 inches at lower bout.
Siracusa 16R: 16 inches at lower bout.
" (43 mm). The scale can also be 25" or even 24
" (44.5 mm).
3/4
17
The bridge feet are hollow,
The
".
3/4