HIKVISION CT-AC303-MB-3-6mm Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera HIKVISION CT-AC303-MB-3-6mm herunter. HIKVISION CT-AC303-MB-3-6mm 2 Seiten.

Seite drucken

TURBO HD

Bullet Camera

User Manual

UD.6L0201D1391A02

Thank you for purchasing our product. If there

are any questions, or requests, please do not

hesitate to contact the dealer.

This manual may contain several technical

incorrect places or printing errors, and the

content is subject to change without notice.

The updates will be added to the new version of

this manual. We will readily improve or update

the products or procedures described in the

manual.

Please refer to the product specification for

camera parameters and functions.

0100001040420

Regulatory Information

FCC Information

FCC compliance: This equipment has been

tested and found to comply with the limits for a

digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated in

a commercial environment. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and used

in accordance with the instruction manual, may

cause harmful interference to radio

communications. Operation of this equipment in

a residential area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

FCC Conditions

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may

cause undesired operation.

EU Conformity Statement

This product and - if applicable - the

supplied accessories too are marked

with "CE" and comply therefore with

the applicable harmonized European

standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC,

the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive):

Products marked with this symbol

cannot be disposed of as unsorted

municipal waste in the European

Union. For proper recycling, return

this product to your local supplier

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points.

www.recyclethis.info.

For more information see:

2006/66/EC (battery directive):

This product contains a battery that

cannot be disposed of as unsorted

municipal waste in the European

Union.

See the product documentation for specific

battery information. The battery is marked with

this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your

supplier or to a designated collection point. For

more information see: www.recyclethis.info.

1 Introduction

1.1 Product Features

This series of camera adopts new generation

sensor with high sensitivity and advanced circuit

design technology It features high resolution,

low image distortion and low noise, etc , which

makes it suitable for surveillance system and

image processing system.

High performance CMOS sensor and high

resolution bring high-quality image;

Low illumination;

OSD menu, parameters are configurable;

Support auto white balance, auto gain control,

electronic shutter control;

SMART IR mode;

Unit transmission control;

Advanced 3-axis design meets different

installation requirements.

1.2 Overview

1.2.1 Overview of Type I Camera

Power Cable

Switch Cable

Mounting Base

CVBS Cable

HD Video Cable

Sun Shield

Lens

IR LED

1.2.2 Overview of Type Camera

Adjustable Screw

Power Cable

Sun Shield

Switch Cable

CVBS Cable

HD Video Cable

Mounting Base

IR LED

III

1.2.3 Overview of Type

Camera

Power Cable

Sun Shield Adjustable Screw

Switch Cable

Lens

HD Video Cable

CVBS Cable

IR LED

All the diagrams only apply to cameras with

a 1080p resolution. The cameras with a 720p

resolution of these three types do not have

CVBS cables and switch cables.

The switch cables are designed for toggling

status of the WDR functions for 1080p cameras.

The WDR function is disabled by default, and

you can short the white and black line-ends of

the switch cable to enable the function.

2 Installation

Before you start:

Please make sure that the device in the package

is in good condition and all the assembly parts

are included.

Make sure that all the related equipment is

power-off during the installation.

Check the specification of the products for the

installation environment.

Check whether the power supply is matched

with your power output to avoid damage.

Please make sure the wall is strong enough to

withstand three times the weight of the camera

and the mounting.

If the wall is the cement wall, you need to insert

expansion screws before you install the camera.

If the wall is the wooden wall, you can use

self-tapping screw to secure the camera.

If the product does not function properly,

please contact your dealer or the nearest

service center. Do not disassemble the camera

for repair or maintenance by yourself.

2.1 Ceiling Mounting for Type I

Camera

Steps:

1.Drill the screw holes and the cable hole in the

ceiling according to the supplied drill template.

2.Hammer the supplied plastic expansion bolt into

the screw holes.

All Screw Holes: for

mounting base

Figure 2-1 Drill Template