Adexa FRY-101v Installations- und Betriebshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Kommerzielle Lebensmittelausrüstung Adexa FRY-101v herunter. Adexa FRY-101v 8 Seiten. Commercial deep fryer

Seite drucken

Temperature safety reset switch

This unit is equipped with a switch that cuts off power if the oil temperature reaches 465°F (240°C). This switch has a manual reset. The reset switch and cover is

usually located on the back panel of the unit,EF-12L series on the Front. Determine what caused the safety switch to activate and correct it.

Possible causes include:dirty oil, low oil level and element not properly submerged in oil.

To reset the temperature safety switch,follow the 4 steps below:

1. Wait until the oil has cooled to 300°F (148°C) or below.

2. Remove the switch cover by unscrewing the cover counterclockwise.

3.Use a pen or similar narrow tool and press the reset button down. The button should stay in the down or in the set position.

4.Place the switch cover back on and secure by screwing clockwise.

Micro Switch

This unit is equipped with a Micro Switch. The switch allows power to the heating element when it is in the correct position. See Figure below. Micro Switch:

1. When the head (C) is in the correct or down position the Micro Switch (A) is pushed in from pad (B) and the heating element will be supplied with power.

2. When the head (F) is in the up position or removed from the unit and pad, (E) switch goes to the "OFF" (D) position and cuts power to the heating element.

Other Possible Troubleshooting Chart

Problem

Power indicator not on when fryer

plugged in.

Thermostat indicator not working and

fryer not heating up.

Power indicator on but fryer not

heating up.

Temperature control is working but

power indicator is not on.

After heating up, heating element

no longer seems to be maintaining

temperature.

Cause(s)

1. Plug is not in socket properly.

2. Fuse has blown

1. Safety overheat stat maybe activated

2. Connection to heating element faulty.

3. Heating element is faulty.

Temperature control is faulty.

Power indicator is faulty

Overheat facility has cut in

Solution(s)

1. Remove plug and insert correctly.

2. Replace suitable fuse

1. Press the safety reset button on the back of the machine, check and service

the machine. Contact a qualified technician or an authorized dealer if safety

reset repeatedly needs resetting during normal use.

2. Contact a qualified technician or an authorized dealer for heating element

fault.

3. Contact a qualified technician or an authorized dealer for heating element

fault.

Contact a qualified technician or an authorized dealer.

Push the reset button at the back（or front) of the fryer.