CENTREGO FLOW 40 Schnellstart-Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Reinigungsgeräte CENTREGO FLOW 40 herunter. CENTREGO FLOW 40 5 Seiten. Flow wash system

Seite drucken

P 6

Open door and detach pipe

Open the door of the Flow device

The peristaltic pump tube will need to be taken

out. The end of the tube is highlighted in the pic-

ture with a yellow arrow

Push the ring around the connection, then pull the

hard end of the tube out simultaneously.

After pulling out the tube end, some uid may

come out. We recommend cleaning this uid up to

keep the inside of the device dry.

CENTREGO FLOW 40

Connect brine inlet on cell tube

CENTREGO FLOW 40

Locate a tube from the Flow wash system kit. Make

sure one end of the tube can reach the inside of the

Flow device and the other to the Flow wash system.

Make sure the tube will not get caught, and there-

fore no liquid ow is restricted.

Push one end of the tube into the same place the

brine tube came from. Make sure this is xed into

the push- t connection.

Ensure the Flow wash system is next to the Flow

device and near a plug socket to be plugged in for

the operation.

Push and t the other end of the pipe into the Flow

wash system into the hole as shown with the yellow

arrow. This connection will be labelled 'Connect to

brine inlet to cell' .

Check that the tube is rmly connected on both

ends.

P 7