Jaggar Electric AFS-540LBS Installations- und Gebrauchsanweisung - Seite 6
Blättern Sie online oder laden Sie pdf Installations- und Gebrauchsanweisung für Innenkamin Jaggar Electric AFS-540LBS herunter. Jaggar Electric AFS-540LBS 8 Seiten.
Seite drucken
of the wall anchor is flush with the wall surface.
14. Then lift up the appliance again, engage it onto the large wall bracket and finally fix the small
bracket to the wall with screws.
15. Place the front glass panel onto the heater by engaging the 4 grooves on the side brackets on the
front glass panel to the 4 fixed bolts on the sides of the heater base unit. NOTE** the front
glass panel is not permanently fixed to the base unit.
front panel.
Installing Decorative Pebbles:
Pull forward the front glass panel from the base unit. Take the white Stones out from the package and
gently pour onto plastic board. Place the front glass panel back on the base unit by pushing into place.
Instructions for Use:
The appliance can be operated either by the switches located on the top right hand side of the fire or by
supplied remote control.
Manual Operation
a)
The switches are located at the top right hand side of the heater unit. The standby toggle Power
Switch (─/O) must be switched ON. ( ─ = ON / O = OFF )
b)
Press the Power
will appear to indicate that the function is ON. To operate the dimmer mode, press
the
button for 3 seconds.
c)
Press the Low
d)
Press the High
e)
Press the Power
f) Press the standby toggle Power Switch (─/O) to the OFF position when not in use.
Remote Operation
a)
The standby toggle Power Switch (─/O) located at the top right hand side of the heater must be
switched ON.
b)
It takes some time for the receiver to respond to the transmitter. Do not PRESS the buttons more
than once within two seconds for correct operation.
c)
Press the Power
d)
Press the Low
e)
Press the High
f) Press the Flame
g)
Press the Power
h)
Press the standby toggle Power Switch (─/O) to the OFF position when not in use.
Maintenance:
button once to turn ON the appliance and fire effect. A red indicator light
button for the low heat setting: press twice to turn off the heat setting.
button for the high heat setting: press twice to turn off the heat setting.
button to turn OFF the appliance when done using.
button to turn on the appliance and fire effect.
button for the low heat setting: press twice to turn off the heat setting.
button for the high heat setting: press twice to turn off the heat setting.
button to operate the dimmer mode.
button to turn OFF the appliance when done using.
Do not try to lift the appliance by the
6