Bristan 1901 Montageanleitung & Inhaltsverzeichnis - Seite 2
Blättern Sie online oder laden Sie pdf Montageanleitung & Inhaltsverzeichnis für Sanitärprodukt Bristan 1901 herunter. Bristan 1901 8 Seiten. Sink mixer
Auch für Bristan 1901: Montageanleitung & Inhaltsverzeichnis (9 seiten), Montageanleitung & Inhaltsverzeichnis (4 seiten)
Seite drucken
BRISTAN
Introduction
Thank you for choosing Bristan, the UK's leading taps and showers expert. We have designed this product with your
To
enjoyment in mind.
ensure that it works to its full potential, it needs to be fitted correctly. These fitting instructions
have been created to give you all of the information you need and, if you need any further help, please do not
hesitate to give us a call on
Safety Note
Please read these instruction thoroughly and retain for future use.
All product manufactured and supplied by Bristan are safe provided they are installed correctly, used correctly and
receive regular maintenance in accordance with these instructions.
These fittings need to be installed in accordance with and meet the requirements of the Water Supply [Water
1999
Fittings] Regulations
Specification
190
Installation
1.
Identify all components and check for completeness,
particularly before commencing installation.
[1]
2.
Fit the legs
to the body using the large sealing
washers [21.
3.
Fit the mixer to the bath using the backnuts [4] and
washers [31, connect the hot and cold water supplies.
4.
Fit the cradle [5] to the mixer [if not already fitted].
using the supplied sealing washer.
5.
Fit the hose [6] to the cradle and the handset [7] using
the small sealing washers [8].
6.
Fully open both valves, letting them run for a few
minutes.
7.
Operate the mixer in both bath and shower mode.
lever [9] from one extreme to the other. Check all Joints and connections for leaks.
IMPORTANT - PLEASE READ
This fitting needs to be installed in accordance with the following Installation Requirements and Notes [IRN]
to ensure they meet the requirements of the Water Supply [Water Fittings] Regulations 1999 and the
Scottish Byelaws 2004.
0844 701 6273.
2004.
and Scottish Byelaws
180
Operating pressure range [bar]
Maximum Static pressure -
NOTE: -
pressures are recommended for optimum
performance.
To
switch from bath to shower mode, move the diverter
Min.
0.2
10.0
bar
Nominally equal [balanced] inlet supply
Max.
8.0