Majestic VF32C Installations- und Betriebsanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Innenkamin Majestic VF32C herunter. Majestic VF32C 20 Seiten. Vf, vfr series vent-free fireboxes

VF/VFR Vent-Free Fireboxes
1. Bend out the nailing flanges located on each side of the
firebox.
. Slide the firebox into prepared framing or position firebox
in its final position and frame later.
3. Level the firebox by checking the top edge of the firebox.
Shim if necessary.
4. Anchor firebox to the side framing members using 8d
nails or other suitable fasteners. Figure 9.
5. The canopy must be installed for safe operation of the
heater.
Nail Sides Through
Nailing Flanges
Figure 9 -
Location of Nailing Flanges
FP2902
INSTALLING CANOpY
nailing flanges
A canopy is furnished with each firebox and MUST be
installed for safe operation. Figure 11
1. Align the canopy with the holes in the top frame.
. Secure the screws as shown.
3. Tighten side screws. Make sure the canopy is level and
secure.
10
FP90
Figure 11 -
Installing Canopy
FP2451
install canopy
FIREpLACE and CANOpY INSTALLATION
When finishing a custom cabinet, mantel, or other built-in
enclosure, the opening size to accommodate the fireplace
with trim installed is as follows:
Figure 10 -
Custom Cabinet
FP2694
VF/VFR32C
custom cabinet
Ref.
w/Trim
A
37M\,"
B
35M\,"
Close fireplace screen panel before
operating a decorative type unvented room
heater.
The firebox canopy must not be modified
or replaced with a canopy that may be
provided with the unvented decorative
room heater.
FP451
Canopy
A
B
VF/VFR36C
VF/VFR42C
w/Trim
w/Trim
41M\,"
35M\,"
Screws
47M\,"
35M\,"
71D0531