Bristan IRBS2-CP Installationsanleitung und Benutzerhandbuch - Seite 18
Blättern Sie online oder laden Sie pdf Installationsanleitung und Benutzerhandbuch für Sanitärprodukt Bristan IRBS2-CP herunter. Bristan IRBS2-CP 20 Seiten. Infrared automatic basin spouts
Seite drucken
Troubleshooting
Symptom
Flow of water
Inlet water supply pressure too
too high.
high.
Spout runs
randomly
Object in the sensing range.
without a user
present.
Sensor light faulty.
Sensor light
Circuit board faulty or has been
not working.
allowed to get wet.
Batteries are exhausted.
Short cycles
Incorrect batteries fitted.
of batteries.
Infrared
sensor
Batteries running low.
flickering.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
18
Cause
Remedy
Adjust inlet water pressure
accordingly. Refer to the
'Specification' section.
Ensure the sensing range is clear.
Contact Bristan Customer
Services.
Replace batteries.
Replace batteries. Ensure
batteries are 1.5V AA (LR6)
Alkaline batteries (preferably
=>2000mAh) for good battery
life.
Replace batteries. Ensure
batteries are 1.5V AA (LR6)
Alkaline batteries (preferably
=>2000mAh) for good battery
life.