Majestic M6543D Anleitung zur Montage - Seite 2

Blättern Sie online oder laden Sie pdf Anleitung zur Montage für Musikinstrument Majestic M6543D herunter. Majestic M6543D 2 Seiten. 4.3 & 5.0 octaves deluxe / artist / professional marimba

Seite drucken

● Connect stabilizer bracket

For better resonator stability, you can find stabilizer

arms locate on the rail side.

Pull up the arms, swing over resonator top and insert

to corresponding rubber notch. Press down to

complete the assembly.

For 4.3 Oct Model

For 5.0 Oct Model

V. Other Adjustment

P11

● Instrument Height

You can elevate or lower the Instrument height by

tuning the hand crank handle located on each side of

instrument. Use imprinted scale guide for leveling.

To maintain balance of adjustment, atjust one

end at a time, do not exceed 2" increment at a time.

IV. Place Toner bars

● Unroll the bars

Carefully unroll the tone bars on the flat floor, flip the

bars over so that the playing side faces up (arch side

faces down). Keep out the springs and sharp

object away from tone bar. Prevent scratch or

damages to bar surface.

Use soft wrapping to protect bars, do not scratch.

● Tone bar leveling

Due to the resonator weight, the rail might sag in the

middle after resonators are attached. This can be

corrected by extension screw length located inside

hinged center.

● Position tone bars

Place the Natural note bars on top of the lower rails

(close to player side).

Position each tone bar in between bar posts, begin

from treble end, working progressively down towards

bass end.

Repeat above process with accidentals (refer to C

chromatic scale), placing tone bars over capped

resonators only. Open resonators should have no bar.

P12

VI. Finished View

M7550H

M6543D

● Fasten Cord & spring

Once tone bars are in place, pull excess bar cord

through bass end, bring bar cord around end posts

and hook the springs together.

The springs has a small tension after they are

booked. You can adjust knot on the cord to get

different tensions after springs are connected.

P13

Memo

P10

P14