Majestic Monaco Installationshandbuch

Blättern Sie online oder laden Sie pdf Installationshandbuch für Armaturen für das Badezimmer Majestic Monaco herunter. Majestic Monaco 7 Seiten.

Monaco Installation Guide - Surface Profiles

The Majestic Shower Company Limited

Unit 17, Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ

Thank you for purchasing this Monaco shower screen. Please study these instructions

carefully before assembly and installation.

Checking of Parts

Parts are listed at the beginning of this guide. Please check all supplied parts immediately

upon receipt and contact the Majestic Shower Company in the event of any missing or

damaged parts.

These instructions are for left and right handed units. All parts are reversible.

Handling of Parts

When handling glass, use suction glass lifters and take care to ensure that corners or edges

are not knocked. Do not place glass on hard surfaces - place cushioning material under-

neath to prevent the glass from shattering.

Unwrap all metal parts carefully to prevent damaging the plated surfaces.

Pre Installation Checks

Prior to undertaking installation, check the accuracy of the following against specifications

for the particular installation location:

- Verticality and flatness of walls. Where wall profiles are used, some lean in or lean out of

the wall relative to the floor or tray can be accommodated (+/- 9mm if 24mm profile is used,

+/- 6mm if 17mm profile is used).

- Levelness and flatness of the floor or tray. Where a profile or underframe is used under-

neath a glass panel, any minor hollows in the mounting surface must be solidly packed to

prevent deflection under the weight of the glass as this may over stress the glass.

Installation Tips

The general principle of assembly is to assemble parts in the steps shown - first a dry

assembly to check fits or mark cutting or drilling positions and then a final assembly with

silicone.

When cutting aluminium extrusion, wrap the profile with masking tape first and cut through

the taped area - this will help protect the surrounding surface. Use a fine file to smooth cut

edges

If anti-calcium glass has been specified, the treated side of the glass will be indicated and

should always face inwards towards the wet side of the shower area.

DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS

Telephone +44 (0) 8448 001 500

Facsimile +44 (0) 1279 635 074 [email protected] www.majesticshowers.com