IKEA ENHET Installationshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Installationshandbuch für Inneneinrichtung IKEA ENHET herunter. IKEA ENHET 20 Seiten. Kitchen
Auch für IKEA ENHET: Installationshandbuch (10 seiten), Installationshandbuch (16 seiten)

Seite drucken

Installing the wall cabinets

In most kitchens, it's best to install your wall cabinets

and frames first. This way, you have room to move

without base cabinets in the way.

If you have an extractor hood placed under a cabinet,

or over the range micro hood under cabinet you might

need to make some cut-outs. Follow the installation

instruction of the appliance to prepare the required

cut-outs. After you've made the required cut-outs,

remember to seal the open edges with silicone, to

prevent the deterioration of the product.

Start from the corner if you have an L-shaped lay-out.

If not, start from one end and move on. Just make sure

that you follow the marks you made for your kitchen

layout, the units should be aligned with the top line wall

units drawn by you. The first unit will set the standard

for the rest. Important to secure that the units are

levelled in all directions.

Move on to the second unit in the same way as the first

one. Please use shims if necessary to keep the units

aligned with the wall. Don't forget to mount it to the

wall securely.

It's important that you use the proper type and size of

fixing devices to attach your cabinets. The minimum

screw thickness is 3/16" and the screw needs to penetrate

at least 11/2" into the wall stud or solid core material. For

advice, contact your local specialized dealer.

As you place the cabinet adjusted for the extractor

hood, make sure you can access the electrical outlet via

the previously made cut-out.

IMPORTANT

Fastening/fixing devices for the wall (i.e. screws

and plugs) are not included with the cabinets

and frames since different wall materials

require different types of fastening devices. Use

fastening devices suitable for the walls in your

home. For advice on suitable fastening devices,

contact your local specialized dealer.

NOTE! If you do not have a horizontal structural support

between the studs and you have problems to hit two

studs with the metal brackets you should use the wall

back rail that gives you the oportunity to hit both studs.

Please follow the Assembly Instruction steps were this

option is presented.

At this point, you should be done with your wall

combination. Level it once more to secure that it has

been done correctly.

Drywall or plaster with

available wood stud

Drywall without available

wood stud

Not enough to fix your

cabinets onto the thin

gypsum board alone.

Masonry