Adey MagnaClean CP1-03-01125 Installation und Instandhaltung

Blättern Sie online oder laden Sie pdf Installation und Instandhaltung für Industrielle Ausrüstung Adey MagnaClean CP1-03-01125 herunter. Adey MagnaClean CP1-03-01125 2 Seiten.

Seite drucken
Servicing instructions
Follow the simple steps below when undertaking a service on the MagnaClean in-line fi lter:
2.
1.
Check the MagnaClean sight glass for build-up of
Unscrew the black retaining knobs on the
black iron oxide. If a service is required, turn off the
MagnaClean lid.
boiler and isolate the electrics. Turn off the isolations
valves on either side.
3.
4.
Using the handle, carefully lift out the magnetic cores
Connect hose to the 1¼" drain valve and open the
and remove from the stainless steel housing.
valve or place a bucket underneath and remove the
Take care not to knock or drop the magnetic cores as
this can result in damage.
5.
6.
Slightly open the inlet isolation valve, leaving the
Once drained, close the valve and drain point, i.e.
other valve closed, and allow the deposits to drain
turn off the drain valve or replace the plug.
through.
7.
8.
Re-open the isolation valves to complete the process.
Replace the magnetic core and tighten the black
Use the MagnaClean air-vent to bleed air from the
retaining knob – Hand tighten only.
MagnaClean
Product Code
Filter Diameter
CP1-03-01123
CP1-03-01124
CP1-03-01125
CP1-03-01126
Technical specifi cations
MagnaClean
Maximum working pressure: 10 bar
Maximum working temperature: 100°C
Casing
Material: 304L Stainless steel
Shape: Single inlet/outlet, 1¼" BSPT drain plug
Lid Seal: EPDM
Drain
1¼" BSPT drain hole
Gaskets
drain plug.
Material: EPDM
Size: PN16
Inlet/outlet
Size options: 2", 3'', 4", 6"
Flanges: PN16
2'' 18mm, 4 bolt holes
3'' 15mm, 8 bolt holes
4'' 15mm, 8 bolt holes
6'' 18mm, 8 bolt holes
For more information on the installation and servicing of ADEY's MagnaClean, call 01242 546717.
DON'T MISS
ADEY'S NEW
industry formula
chemicals now
available in
5L & 10L
unit.
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - [email protected] 0844 556 1818
No. of magnetic
Casing volume
Inlet size
(mm)
(mm / '' )
rods
(litres)
160
50 / 2''
5
3.3
210
80 / 3''
6
7.08
216
100 / 4''
7
8.18
324
150 / 6''
9
26.37
Magnets
Material: High power, 'rare earth' high intensity core
Sleeve: 304L Stainless steel
Lengths: 179mm, 206mm, 229mm, 259mm
Diameter: 25mm
Sight glass
Weld material: DIN1.4404 stainless steel
Collar nut: DIN1.4301/DIN1.4307 stainless steel
Glass: Toughened soda lime to BS3463
Product side seal: EPDM
Outer seal: Non-asbestos fi bre (Klingersil C4400)
MagnaClean
manufactured to EN 13445 : 2009
Service guarantee
MagnaClean will provide years of protection maintaining
the high effi ciency of your heating system and result in
fi nancial benefi t and increased system reliability.
The product is backed by a two year guarantee.
Information
Alternatively, visit www.adey.co.uk
Telephone: 01242 546717
www.adey.co.uk
Produced from recycled material
A carbon neutral company
Installation and servicing