AFRISO DIM 20 Gebrauchsanweisung - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Messgeräte AFRISO DIM 20 herunter. AFRISO DIM 20 20 Seiten. Digital pressure gauge

Product description

The digital pressure gauge DIM 20 can be installed simply and

quickly on site. The instrument housing is rotatable and as such en-

sures good readability even under unusual connection conditions.

DIM 20 can be operated and configured via a menu system and a

3 key pad. The adjusted parameters are memorized in an EEPROM

(electronic memory) and remain memorized even when the battery is

changed.

In addition to the indication of information about the measuring

range, different pressure units as well as the number of decimal

points can be configured. The starting value and full scale value of

the measurement range can be re-calibrated by the customer on

site. The original factory calibration can also be re-instated, if re-

quired. Excess over- or under-pressure is indicated.

Product identification

The instrument is identified by its type designation plate. This shows

the most important data. The order code identifies the product in de-

tail. The programme version of the operating software is shown on

the display for approx. 1 second after the instrument has been

switched on.

In case of any query, please have the programme version and

order code information readily available.

Fig. 1: Type designation plate

Specified pres-

sure

Order number

Serial number

DIM 20