Gamma 5003 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Besaitungsmaschinen Gamma 5003 herunter. Gamma 5003 20 Seiten. 6 point mounting
Auch für Gamma 5003: Benutzerhandbuch (19 seiten), Benutzerhandbuch (20 seiten), Benutzerhandbuch (20 seiten)

Seite drucken

for reduced clamping pressure while securing and holding the string under tension.

STRINGING THE FRAME

Clamp Base Operation

To lock the string clamp base to the turntable,

rotate the clamp base locking lever clockwise.

To release the string clamp base from the

turntable, rotate the clamp base locking lever

counter-clockwise.

The locking lever should be tightened enough

to prevent clamp base slippage on the turn-

table when the desired tension is placed on

the string.

String Clamp Operation

The string clamps are a dual action design

where the string clamp and clamp base oper-

ate independently of one another.

To clamp a string, lift the string clamp, place

the string between the jaws and depress the

string clamp lever to secure the string. The

clamping pressure applied to the string should

be adjusted to provide sufficient pressure

to secure the string when subjected to the

desired pulling tension. The diamond coated

gripper plates provide for increased friction

between the clamps and the string to allow

Clamping the First Main String

To begin stringing the main strings, thread

the two ends of the string through the two

center holes at the appropriate end of the

frame and continue through the opposite

center holes. Thread one end of the string

through the adjacent grommet hole and pull

excess by hand.

Secure one of the strings using a string clamp.