Gamma 5003 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Besaitungsmaschinen Gamma 5003 herunter. Gamma 5003 20 Seiten. 6 point mounting
Auch für Gamma 5003: Benutzerhandbuch (20 seiten), Benutzerhandbuch (19 seiten), Benutzerhandbuch (20 seiten)

Seite drucken

ASSEMBLY INSTRUCTIONS

Base Leg Assembly

The stringing machine uses a four leg base

design. The legs must be assembled to the

lower column support before use. This is the

larger of the two posts with the GAMMA label.

Note: For illustration purposes, the support

column has been painted white for these

instructions.

Align the holes in the leg flange with the

matching holes in the lower column support

post. Secure the leg with one FLAT HEAD

cap screw through the upper hole, and one

SOCKET HEAD cap screw through the bot-

tom hole. Repeat this procedure for the three

remaining legs.

Base Foot Height Adjustment

Each foot of the Base Stand can be adjusted

to compensate for uneven surfaces.

Upper Column Support Assembly

The upper column support is shipped inside

of the lower column support. Unloosen the

two set screws at the top of the lower column

support / base leg assembly. Extend the up-

per column to the maximum height and lock

in place with the two set screws located at

the top of the lower column support.