Gamma 6004 Benutzerhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Besaitungsmaschinen Gamma 6004 herunter. Gamma 6004 20 Seiten. 6 point mounting
Auch für Gamma 6004: Benutzerhandbuch (20 seiten), Benutzerhandbuch (20 seiten), Benutzerhandbuch (19 seiten)

Seite drucken

MAINTENANCE and ADJUSTMENTS

Adjusting the Tensioner Brake

Step 1

After stringing many racquets, the brake of the tensioner

may need to be adjusted.

With the brake lever engaged, loosen the lock bolt

located on the back side of the tensioner frame with the

4mm hex wrench.

Note: The lock bolt should only be loosened enough to

be turned by hand and must not be removed completely.

A - Lock Bolt

Adjusting the Tensioner Brake

Step 2

With the lock bolt loosened and the brake lever engaged

in the latch, insert the 6 mm hex wrench through the hole

in the tensioner cover and into the (C) brake lever

adjusting bolt.

C - Brake Lever Adjustment Bolt

Adjusting the Tensioner Brake

Step 3

To tighten the braking mechanism, turn the brake lever

adjusting bolt counter clockwise by about 1/8 turn.

Retighten the lock bolt on the back side of the tensioner

frame and check for brake tightness. The tensioner

should move freely along the track with the brake lever

engaged and should hold tension with the brake lever

released. If more adjustment is needed, repeat steps

above until properly adjusted.

Note: Cover Removed For Clarity